How to Make a Clay Darigan Snuffly
Written by Troggy7

What you will need:
Blue Clay (I use SculpyIII)
Black Clay (S3)
Light Yellow Clay (S3)
A toothpick or sculpting tool
Light blue, Red, Black, and White Acrylic paint

1. Cut the block of blue into pieces like seen in the picture.

2. Shape the two larger ones into balls. Then four small ones into teardrop shapes, and then a cylinder with a triangle at the end for the tail.

3. Attach the pieces together. I used the Neopets image for a reference.



4. Take the black, and cut off to medium sized strips and two smaller circles. Roll the strips into sharp curves for the long horns, and the circles into little points for the little horns.

5. Make 6 ‘L’ shaped claws.

6. Attach the pieces together. I used the Neopets image for a reference.



7. Make a triangle out of the black clay. This is the base for the wing. Take your toothpick and take two triangle shapes out of it.

8. You will need two of these wings. Attach to the back.

9. With the light yellow clay, roll out four little teeth and attach them.



BAKE THE YOUR SCULPTURE
Follow the instructions that come with the clay you buy on bake time.

10. This is were the paint comes in. With the light blue paint, carefully paint on the face and stomach pattern. Let dry before step 11.

11. With the Black paint, make the shape of the outline of the eyes.

12. With the red paint fill the eyes in, and add a little shine with the white.



There you go! You now have your own Darigan Snuffly! Show it off to your friends.



Current Rating:
Rate this page: