How to Make a Clay Dribblet
Written by Troggy7

What you will need:

Light Blue Clay (I use SculpyIII)
Pink Clay (S3)
Slightly darker pink Clay (Mixed Pink with a little red S3)
A toothpick or sculpting tool
Black, Light yellow, Goldenrod and White Acrylic paint
(Optional) Sculpy Gloss or glaze. Clear nail polish will work fine

1. Shape The larger, lighter pink ball into the tongue shape.

2. Use your finger and your toothpick (Or anything else) to shape the mouth smile.

3. Take the darker pink and roll it into a short cylinder. Pinch the ends together. (See diagram)*



4. With your toothpick poke little holes here and there on the tongue.

5. Take the light blue and make two droplet shapes and two or three ‘puddles’ Attach them to Dribblet.

BAKE SCULPTURE NOW
Follow the instructions that come with the clay you buy on bake time.

6. This is were the paint comes in. With the Black paint, carefully paint on the outline of the eyes. After that dries, add the other colors to complete the eye (see diagram steps).



- Optional - You can use your glaze/gloss/clear nail polish and put a coat of it on the Dribblet. It give it the shiny, drooly tongue look!

There you go! You now have your own Dribblet Petpet! Go show it off to your friends now : )



*(Credit to the Quiggle Tutorial for the tongue technique :D)



Current Rating:
Rate this page: